Pages

Wednesday, December 17, 2025

Revolutionizing Data Throughput: Hanyang University Unveils 108 Gb/s Energy-Efficient PAM-8 Receiver

   

About Topic In Short:



Who:

Hanyang University researchers, led by M.S./Ph.D. student Sangwan Lee and Associate Professor Jaeduk Han, developed the system

What:

A highly linear, energy-efficient 108 Gb/s PAM-8 receiver frontend system implemented in 28nm CMOS for high-speed data communication

How:

Through a multi-path architecture to enhance the linearity-power trade-off and a separated FFE path to compensate for channel loss without signal compression

 

Introduction: The Need for Speed and Efficiency

The accelerating demands of modern data infrastructure—including data centers, AI clusters, the metaverse, and supercomputers—require data transfer rates far exceeding 100 Gb/s. However, achieving high-speed data communication presents significant challenges: sending very fast PAM-8 signals often results in degraded signal quality, and conventional receivers consume excessive power while attempting to compensate for signal weakening over distance. To overcome these dual problems, researchers at Hanyang University have developed a novel solution: a highly linear, energy-efficient 108 Gb/s PAM-8 receiver frontend system implemented in 28nm CMOS.


{Hanyang University Researchers Propose 108 Gb/s PAM-8 Receiver Frontend System in

28nm CMOS}

The Technical Breakthrough

Effective processing of high-voltage, higher-order PAM-8 signals, which are essential for data rates above 100 Gb/s, necessitates an extremely linear receiver to maintain robust signal-to-noise ratios. The Hanyang University team, led by M.S./Ph.D. student Sangwan Lee and Associate Professor Jaeduk Han, achieved this breakthrough by designing a unique receiver that dramatically enhances the linearity-power trade-off. The resulting system is poised for immediate application as a core component in next-generation high-speed data communication infrastructure.

Key Architectural Innovations

The system’s exceptional performance is derived from two unique architectures tailored specifically for processing PAM-8 signals:

1. Multi-Path Architecture for Enhanced Linearity

The researchers dramatically improved the linearity-power trade-off by implementing a multi-path architecture. This architecture divides the signal path, allowing each separate path to manage a sub-range of the total dynamic range. This clever division reduces the number of required slicers or samplers, which, in turn, decreases the load on the final stage. The result is remarkable efficiency: the architecture successfully doubles the linearity with only a 20% increase in power.

2. Separated FFE Path for Loss Compensation

High-speed signals inevitably suffer from significant channel loss, making compensation via a Feed-Forward Equalizer (FFE) essential. Conventionally, the FFE must process large-voltage signals directly, often leading to signal compression. The Hanyang team solved this by designing a structure that completely separates the FFE path from the main signal path. This separated path calculates compensation values using only a small, attenuated signal, preventing compression and ensuring accurate channel loss compensation even when large input signals are handled. The system includes a two-tap FFE capability.

Performance Metrics

The novel highly linear receiver frontend system in 28nm CMOS exhibits impressive performance metrics:

  • Data Rate: 108 Gb/s
  • Input Range: 1.4 Vppd
  • Total Power: 210.8 mW
  • Energy Efficiency: 1.95 pJ/bit

Thus Speak Authors/Experts

The researchers emphasized the strategic design behind the new technology:

Mr. Sangwan Lee remarks: "In this research, we have maximized both power efficiency and signal processing capability through two unique architectures for processing 'PAM-8' signals, which are essential for next-generation high-speed communication."

Dr. Jaeduk Han concludes: "It will provide the backbone for complex AI services like real-time translation, advanced medical diagnostics, and autonomous driving systems to become faster and more universally available. Moreover, by providing the massive bandwidth required for immersive virtual and augmented reality experiences, it will help make a seamless virtual world a reality. Lastly, as global data demand continues to explode, our power-efficient approach will help reduce the energy footprint of data centers, contributing to sustainable technological growth."

Conclusion

This research is expected to accelerate the computational speed of supercomputers and dramatically increase communication speeds between servers in AI clusters, thereby facilitating the training of large-scale AI models and the processing of massive datasets. By providing the foundational technology for future 800G and 1.6T Ethernet networking equipment and contributing a power-efficient approach to sustainable data centers, the 108 Gb/s PAM-8 receiver is set to serve as the backbone for the next generation of applications over the next 5 to 10 years.


Hashtag/Keyword/Labels List

#PAM8Receiver #108Gbps #HighSpeedData #EnergyEfficiency #28nmCMOS #DataCenters #AIClusters #JaedukHan #SangwanLee #MultiPathArchitecture #FFE

References/Resources List

  1. https://www.electronicsforu.com/news/more-efficient-high-speed-data-receivers  
  2. https://www.eurekalert.org/news-releases/1107182  
  3. https://techxplore.com/news/2025-11-frontend-gbs-pam.html 
  4. https://www.prnewswire.com/news-releases/hanyang-university-researchers-propose-108-gbs-pam-8-receiver-frontend-system-in-28nm-cmos-302624634.html 

 For more such blog posts visit Index page or click InnovationBuzz label. 

…till next post, bye-bye and take-care.

Tuesday, December 16, 2025

Bio-Robotics Breakthrough: Artificial Tendons Unlock Greater Strength and Durability in Muscle-Powered Machines

   

About Topic In Short:



Who:

Engineers and researchers at MIT, including lead author Ritu Raman, developed this technology, with co-authors including Professor Martin Culpepper and Professor Xuanhe Zhao.

What:

They developed artificial hydrogel tendons to efficiently connect soft, lab-grown muscle tissue to rigid synthetic skeletons in biohybrid robots, forming a “muscle-tendon unit”. This design addresses the limitation of biohybrid robots' weak and slow muscle-powered motion.

How:

The hydrogel tendons bridge the mechanical mismatch between soft muscle and rigid skeletons, efficiently transmitting force. This resulted in a robotic gripper that pinched three times faster and with 30 times more force compared to muscle alone, while maintaining performance over thousands of cycles.

 

Overcoming the Mechanical Mismatch in Biohybrid Robotics

Biohybrid robotics, a burgeoning field, relies on combining synthetic mechanical parts with living actuators, typically lab-grown muscle tissue, to create crawlers, walkers, swimmers, and grippers. While muscle tissue offers unique benefits, such as the ability to grow stronger with use and naturally heal when damaged, traditional designs have faced significant limitations.

The primary challenge is the weak and slow motion generated by these bio-bots, as soft muscle tissue is difficult to efficiently attach to rigid synthetic skeletons. This mechanical mismatch causes force to be lost at connection points, and the soft tissue can tear or detach, restricting the robot's ability to perform tasks that require speed, durability, or repeated operation. Consequently, a large amount of muscle material often goes to waste, simply used for attachment rather than motion.


{Researchers have developed artificial tendons for muscle-powered robots. They attached the rubber band-like tendons (blue) to either end of a small piece of lab-grown muscle (red), forming a “muscle-tendon unit.” Photo Credit: Courtesy of the researchers; edited by MIT News}

The Hydrogel Solution from MIT Engineers

Engineers at MIT, led by Assistant Professor Ritu Raman, successfully addressed this challenge by incorporating artificial tendons into their biohybrid designs. Drawing inspiration from the body's natural architecture, the researchers utilized tough and flexible hydrogel—a polymer-based gel—to create rubber band-like tendons. These hydrogel tendons are designed to be "halfway in stiffness between muscle and bone," thereby bridging the mechanical gap between the soft muscle tissue and the rigid skeleton.

The design creates a robust “muscle-tendon unit,” where the tendons connect the central muscle tissue to the robotic skeleton, forming a "muscle-tendon-skeleton" system. By modeling the system as interconnected springs, the research team calculated the optimal stiffness required for the hydrogel tendons to ensure efficient force transfer while simultaneously protecting the soft tissue from tearing.

Dramatic Increases in Power and Efficiency

The performance of the tendon-assisted system dramatically exceeded previous biohybrid designs. In experiments involving a robotic gripper, the device equipped with the muscle-tendon unit pinched three times faster and generated 30 times more force compared to a gripper powered solely by muscle.

Furthermore, the new tendon-based design exhibited high durability, maintaining performance over 7,000 contraction cycles. The addition of artificial tendons increased the robot’s power-to-weight ratio by 11 times, signifying that the system requires far less muscle tissue to perform the same amount of work. This new architecture is highly modular and is envisioned as a universal engineering element that can be adapted to various biohybrid robot designs, including crawlers, walkers, swimmers, and grippers.

Thus Speak Authors/Experts

Ritu Raman, Assistant Professor of Mechanical Engineering (MechE) at MIT: “We are introducing artificial tendons as interchangeable connectors between muscle actuators and robotic skeletons”. Raman added that this modularity “could make it easier to design a wide range of robotic applications, from microscale surgical tools to adaptive, autonomous exploratory machines”. She also noted that the biological solution is "to have tendons that are halfway in stiffness between muscle and bone, that allow you to bridge this mechanical mismatch between soft muscle and rigid skeleton".

Simone Schürle-Finke, Associate Professor of Health Sciences and Technology at ETH Zürich: “The tough-hydrogel tendons create a more physiological muscle–tendon–bone architecture, which greatly improves force transmission, durability, and modularity”. She believes this development "moves the field toward biohybrid systems that can operate repeatably and eventually function outside the lab".

Conclusion

This advancement in integrating hydrogel tendons into biohybrid robotics marks a critical step toward practical, real-world applications. By stabilizing the connection between living actuators and synthetic skeletons, this technology overcomes key limitations of weak motion and low durability, enabling tendon-assisted muscle actuators to move larger structures safely and reliably. Potential applications include deploying muscle-bound bots as miniature surgical assistants or machines capable of tackling unforeseen tasks in hazardous or remote environments, leveraging the muscle’s inherent ability to heal and gain strength. MIT researchers are now developing protective casings and other components to ensure these robots can operate effectively outside the laboratory.


Hashtag/Keyword/Labels List

#BiohybridRobotics #ArtificialTendons #Hydrogel #MITEngineering #MusclePoweredRobots #Actuators #RoboticsInnovation #MechE #PowerToWeightRatio #SurgicalRobots